A kitchen of any house is a special place where the aroma and delicious taste of food is created and wonderful family conversations take place over cooking food. Most food preparations require water and you do not want to pose any risk to your family by using contaminated water in the vital act of food preparation and of consuming plain water. To ensure that pure water goes into your food and tummies, you must employ filter taps. These are fitted with a filter cartridge that removes all contaminants such as debris and chemicals. Out of the many filter taps available in the market, you should choose the ones which have a reputable name in the market. This is because, the filtering capabilities of a non- branded tap cannot really be trusted. It would be a bit like trusting burst pipes in the kitchen to prevent your house from flooding.
One of the most trustworthy companies of kitchenware is Franke. The company has been in the market since 1911 and has been innovating on kitchen products consistently. Moreover, Franke‘s filter taps come with a 5 year warranty on valve mechanisms and a 1 year warranty on their coatings and finishings, generating valuable trust among customers.
Along with trust, the company also offers variety in the form of a diverse range of filter taps that come in different designs, heights and functionalities.While picking a uniquely designed tap is a matter of personal taste, you must know which kind of tap serves which function. Thus, let us see the range of differently functional Franke kitchen taps below:
Single-Flow Spout and Bi-Flow Spout : A Single-flow spout tap implies that the flow of only one channel of water can be adjusted by the use of one available lever while a bi-flow spout tap has two levers, with which flow of two channels of water can be adjusted. You must use the former in places where you can do without water of two different temperatures.
When building a new home, you will do well to consider the inclusions I have mentioned here in this article. Another thing to remember is to make sure you have an adequate building inspector on the job, as a backup to your builder. You need to have the peace of mind that you are being treated fairly and respectfully and the presence of an independent building inspector is going to make your home builder aware that you are on to his corner cutting tricks.
Triflow: If you need water in three different temperature qualities, namely, hot, cold and moderate, then you must make use of a triflow tap. You can use hot water for cooking while cold water can be used for making a drink.
Boiling Water: This kind of tap not only delivers hot and cold water, but also water that is super hot (ie water of 100 degree Celsius). Such hot water can be used in cooking and brewing tea quickly.
Spray Tap: You can either buy a stand alone pull out spray tap or a bi-flow spout tap with a spraying handle as well. This kind of tap can be used for washing vegetables and fruits with speed.
Thus, with a diverse range of variously functional taps, you can enjoy clean water in different ways. Donate now to help where it’s needed most.
When it comes to heating a house, electric heaters are mostly preferred as they are economical, convenient and are extremely good at heating up a small space. They are becoming very common these days as more and more households are moving towards these electric heating devices. Though, these electric heating devices are convenient way to warm up a house, but just like any other electrical appliance, electric heaters also require some maintenance. While using electric heating devices, it is essential to keep a few things in mind.
Keep the device away from electric shocks:
These heating devices can give an electric shock as they run on electricity so it is essential to keep these electric heating devices at a place, where there is no moisture. We should avoid these devices coming in contact with water or other forms of spilled liquid. We should never keep an electric heater at such place where there is a high probability of the heater coming in contact with moisture to avoid accidental electrical shocks.
The device should be avoided to come in contact with Fires:
If there is a circuit overload or any electric shortage, electric heaters can result in fires in the house. Clothes or other such flammable items can cause fires if coming within close proximity of the heater. It can cause problems as multiple electrical appliances run on the same circuit. In order to avoid circuit overloading, it is essential to make sure that we should not run multiple appliances at the same time. Electric heaters should be placed at such place where it cannot come in contact with any object that can easily catch fire.
Eliminate the risk of burns:
Sometimes due to continuously functioning of these devices, most of the parts can become very hot and coming in contact with these parts can result in serious burns and injuries. So you should make sure that clothes could not come in contact with these parts as they can catch fire if exposed to these parts, increasing the risk exponential. Especially small children and pets should be kept away from these heating devices as they would be unaware that they can be hurt or even end up seriously injured. While using these electric heating devices, it is advisable to monitor children and pets to avoid such kinds of injuries. It is essential to follow the operational procedures while using these electric heating devices as most of the devices have operational manual attached to it. So while using these devices it is advisable to follow the instructions and use the devices accordingly. Most of the devices have a feature of temperature control so we can easily set the temperature of electric heating devices according to our needs.
Apart from this, in order to prevent accidents caused by heaters, there should be an adequate distance between the heater and any potential source of combustion including furniture, curtains, anything made of paper or any flammable items. One important tip is while purchasing these electric heating systems you need to make sure that it must have safety certifications and energy star mark on it. Each electric heating device should meet all the courses of action and pass energy standards before being used in houses. They should be thoroughly tested and meet the often stringent requirements. You should avoid purchasing those items that don’t contain energy mark and don’t conform to standard because in this case you will be having no assurance that the build quality is adequate. Along with all these preventions, it is also important to choose a reliable supplier of these electric heating devices as choosing the correct heater along with the correct supplier will help lower your energy bills and reduce the environmental impact of your house.
The Energy Saving Fund has pledged a £150 million investment in home improvement grants over the next five years – providing 200,000 installations of boilers, roofing, double-glazing and solar panels with a total retail value of half a billion pounds.
The not-for-profit organisation which offers help and advice along with financial assistance to consumers planning home improvements outlined their half decade-long programme just a week after revealing they were expanding nationwide from their Cheshire-based HQ.
“The most important spin-off from this pledge is the jobs it will create,” said ESF trustee and founder Thomas Adams,” speaking from the organisation’
ESF believes the new five year programme will create at least 1,000 new jobs across the home improvement sector. And the organisation has already asked independent sales training business, Pro-Sell, of Widnes, to provide them with 200 sales advisors to take their message to the consumer.
“ESF is now quite well known in the North where we have used our negotiating skills to make high quality energy saving home improvements available at affordable prices to the average family,” added Mr Adams.
“We have agreed deals and discounts with some of the biggest and best manufacturers and installers in the industry to ensure ESF customers can enjoy high quality home improvements at the very best rates. We’ve been doing this for six years and now we will see consumers right across the country enjoying the benefits ESF can bring.”
Trustee Alan Holloway from Winsford, Cheshire added:” We’ve been described as a 21st Century equivalent of the Co-operative movement, but we really are simply negotiating the best deals possible with the manufacturers and installers so that the consumer can enjoy the benefits of energy efficiency whether that be via a new boiler or double glazing for the windows in their homes.
“ESF has created a new stream of work for the home improvement sector which has ultimately led to the creation of new jobs. And that must be good news for everybody.”
Fuel injection cleaner, also known as injector cleaner, is a simple trick that can give you a lot of bang for your buck. You pour it in your gas tank when filling up at the gas station, and away it goes. Especially in California, where emissions tests happen often, having a peak performance vehicle is very important. Clean fuel injectors help ensure:
- Fuel Economy
- Peak Engine Performance
If that’s something you want as a car owner, consider using a fuel injection cleaner every couple of months.
Dirty Fuel Injectors
When fuel injectors are dirty, they can’t deliver the correct spray required for combustion, and as a result, fuel economy and engine performance suffers. This, in the long run, can be costly or can even begin to cause symptoms:
- Rough Idle
- Poor Fuel Economy
That’s why fuel injection cleaner is a must. The reason I recommend fuel injector cleaner is because it’s one of those simple things a person can do without having to replace any parts or any under the hood work. Normally in a tuneup, lots of things get replaced, things like spark plugs, distributor caps, belts, and fluids. But with fuel injectors, running an additive through a tank of gas every once in a while will keep them clean and running properly. It’s something you can do cheaply and without automotive knowhow. Just follow the instructions on the bottle.
How Fuel Injector Cleaner Works
Over time, all fuel injectors become clogged. This happens because the deposits come from the gasoline itself. Gasoline is a compound mixture of hydrocarbons, and includes waxy, heavy chemicals known as oilfins, which yield a lot of energy when burned. As long as a car is running, the fuel injectors and engine runs efficiently. The clogging occurs when the engine is shut off, and a process known as heat soak occurs. Residue of fuel in the injector nozzles begins to evaporate, and it leaves the oilfins behind, which don’t evaporate and some of which don’t get washed away, but instead get baked into hard varnish deposits, which ultimately will clog the injectors.
Newer injectors are more resistant than the old ones to this kind of clogging, and additives are added to gasoline to try to dissolve some of these buildups. But cars that make mostly short trips are still especially susceptible to fuel injection clogging, and every injector will ultimately become clogged over time. If the fuel injectors are never cleaned, as the car ages you’ll start to notice that your car shakes a bit while idling and eventually it will either stall or misfire, and all the while your fuel economy and engine performance will suffer. I was just in a car the other day that suffered from a very rough idle, and the driver had to keep a little pressure on the gas petal while stopped to keep the car from stalling. Fuel injector cleaner works by stripping away the clogging the builds up over time.
The Best Fuel Injector Cleaner
There are many different kinds of fuel injection cleaners, and the best fuel injection cleaner is one that might surprise you. It’s gasoline itself! Cheap gasoline is often lacking in the additives that breakdown clogging and, over the long haul, can cost you more money than it saves. That being said, there are also some very good brands of fuel injection cleaner out there. I like Red Line’s fuel system treatment the best. Red Line’s Fuel injection cleaner is a total fuel system cleaner and works really well.
Another great way to go is seafoam, which I’ve written a lot about as well. Seafoam can be added to your gas tank as well as your oil. Check out the link for more info. Some other great injector cleaner is STP injection cleaner. It’s reported to have the highest concentration of cleaning agents out of any fuel system cleaner. It’s good for really tough clogs, but I still prefer Redline fuel system cleaner for boosting overall fuel economy. The best tip for keeping your injectors clean is to not buy cheap gas, but this is only a preventative measure. My guess is that for people reading this article, it’s because your fuel injectors are already partially clogged and are causing problems to your engine performance. If that’s the case, then you still have quite a few options. There are many cheap fuel injection cleaners that you can add to your gasoline which will act like drano on a sink pipe and will dissolve many of the clogs in your injectors. One such product is listed to the right. When used semi-regularly (once every few months) it will keep your injectors nice and clean.
But this may not be enough for some engines. Older engines already experiencing heavy problems may need a bigger hand. For this, you may actually need a fuel injection cleaner kit that will allow you to dismantle the fuel injection system and give it a nice clean. However, this is not always possible and some fuel injectors are delicate. Before trying this, I would definitely recommend running a bottle of fuel injection cleaner additive or two through a tank of gas and see if that helps at all. It’s cheap and effective.
For most people, a house is the most expensive thing that they will ever buy. Furthermore, the average buyer of a residence will live in that place for nearly a decade. With so much time and money going into one structure, it goes without saying that the owners should love the structure. While renovations and remodeling can make a residence more appealing, the only true way to make it perfect is to construct it from the ground up. New home builders can work with buyers to ensure that everything is made exactly to their specifications. The only thing that will limit what can go into the house is the owner’s imagination.
In 1973, the average house in the United States was just under 1,700 square feet. Today, that number has increased to nearly 2,700 square feet. In short, older residences are generally going to be smaller than what modern buyers want and expect. And since no two families are the same, you can work with new home builders to create a home that is exactly the right size for your current or future family.
A recent poll of contractors showed that the additions most requested by house hunters are a separate laundry room, an extra large pantry, wireless security system, security lights, and garage storage. Since contractors know these are popular amenities, they are putting them into their plans for new residences. Rather than buy an old structure and remodel it to add everything you need, it can be cheaper and more efficient to simply build a residence designed with those specific amenities in mind. Furthermore, new home builders craft their designs around modern technology, such as Internet and satellite television. This reduces the unsightly cords and satellite dishes that you will see in some older residences.
Peace of Mind
As we discussed above, buying a house is a huge investment of time and money. In many cases, buyers may use all or much of their savings. This can be an issue if maintenance problems arise in the purchase. Having to pay $5,000 to the plumber, or $10,000 to the electrician could be difficult for many people after purchasing a house. With new home builders, the buyer can be confident that not only is all the material used new, but much of it will be covered under warranty as well. In most cases, the owner will get years, if not decades, of use before any maintenance, beyond basic upkeep, is required. So if you are the type of buyer that is sinking all or most of your savings into buying a residence, you should strongly consider a new structure rather than an old one.
In conclusion, new home builders can give buyers exactly what they want. Nearly every man, woman, and child has thought about what their dream house would look like. Having a home built with your input is the best way to realize this dream.
A first-of-its-kind alliance, the ELEVATE Design Collective, was announced today to bring together six industry-leading home design brands Delta® Faucet Company, Formica Corporation, Hunter Fan, JELD-WEN®, KitchenAid® and Schlage®, to highlight home accents within home style and interior design conversations. Anchored in design trends from top industry designers, the ELEVATE Design Collective creates a prominent voice for style-oriented brands in the interior design space. The Design Collective will provide design-driven insight and inspiration to interior designers, architects and remodelers.
Collaborating to transform home accents — from faucets, kitchen appliances and countertops to door hardware, doors and fans — into design statements, the ELEVATE Design Collective partnered with the Pantone Color Institute™, a color research and information center recognized throughout the world as the leading source for color information, to create a signature ELEVATE color. Based on the brand designers’ insights into upcoming home trends, the ELEVATE Pantone color will be incorporated into a collection of custom products from the participating brands and unveiled at an exclusive launch event in a NYC urban loft space during New York Design Week. Together, the ELEVATE Design Collective will showcase the power of utilizing home accents to create a cohesive and unique design aesthetic.
“We are very excited to partner with the ELEVATE Design Collective as truly innovative brands have come together with a unique design vision,” said Laurie Pressman, Vice President of the Pantone Color Institute. “At the Pantone Color Institute, we are committed to providing brands a greater understanding of color to help tell their story; the vision captured within the ELEVATE Design Collective is reflective of color and interior design trends brands and designers are seeing in the home space.”
The vision to create the ELEVATE Design Collective began with Schlage, a brand of Allegion that has created stylish, innovative door hardware products for more than 95 years. Schlage recognized the opportunity to bring like-minded, home accent brands together to make a larger contribution to the interior design industry and educate influencers and consumers alike on the latest styles and trends in home design.
“We are thrilled to kick off year one of the ELEVATE Design Collective and feel a strong alliance with each brand in our effort to bring home accents to the forefront of the design and style conversation,” said Tamara Douce, influencer marketing manager, Schlage. “A home’s style is created and defined in the details. Well-chosen pops of color, texture, placement and functionality make a home reflective of the homeowners’ personal taste. It is our goal to empower interior designers, architects and remodelers to feel confident in making those design choices.”
The ELEVATE Design Collective will be supported with a dedicated microsite offering a behind-the-scenes look at the NYC urban loft project, and the brand designers’ inspiration and insight into the creation of the custom ELEVATE Pantone color.
To learn more about the ELEVATE Design Collective and the 2016 participating brands, visit ELEVATE Design Collective to sign up for updates and join the conversation on the ELEVATE Instagram and Facebook pages.
About The ELEVATE Design Collective
The ELEVATE Design Collective is a first-of-its-kind alliance of industry-leading brands that have come together to bring home accents to the forefront of the style and design conversation in home remodeling and renovation. The 2016 ELEVATE Design Collective is transforming the look and feel of the entire home with brands including Delta® Faucet Company, Formica Corporation, Hunter Fan, JELD-WEN®, KitchenAid® and Schlage®. For more information, visit ELEVATE Design Collective and join the conversation on the ELEVATE Instagram and Facebook pages.
About Pantone and the Pantone Color Institute
Pantone LLC, a wholly owned subsidiary of X-Rite, Incorporated, is the global color authority and provider of professional color standards for the design industries. Pantone products have encouraged colorful exploration and expressions of creativity from inspiration to implementation for more than 50 years. Through the Pantone Color Institute, Pantone continues to chart future color direction and study how color influences human thought processes, emotions and physical reactions. Pantone furthers its commitment to providing professionals with a greater understanding of color and to help them utilize color more effectively. Always a source for color inspiration, Pantone also offers designer-inspired products and services for consumers.
If you are looking at building a new house or at a remodel to your existing property, working with a contractor can have its ups and downs. While dealing with a professional contractor can be a great experience, hiring a shady contractor can end up in a bad situation. The general rule-of-thumb for building is that materials usually account for about 40 percent of the total bid cost. The remaining costs encompass overhead and profit margin (which is generally in the neighborhood of 15 to 20 percent). Here are some items to consider when hiring a contractor:
Choosing the Right Person for the Job
Always do some background research before just hiring any contractor. Ask to speak with past clients, see testimonials or go online to see any reviews on popular building related associations or other related websites. While a contractor may give you an inexpensive bid, it may be that cheap for a reason. Make sure that the contractor is reputable within the community and has an excellent network of sub-contractors to work with. Financial references are always good to verify too. Check in with banks or lumber stores that the contractor works with to verify that they are in good standing financially. The Better Business Bureau and also the state’s Consumer Protection Agency should also be contacted to see if any complaints have been filed against the contractor. Additionally, you should ask a variety of questions when interviewing a contractor. Here are some examples:
- How many projects do they currently have going?
- Do they take on projects like yours?
- If new construction, you can usually find out a rough estimate of cost to build per square foot
- How long have they been in the construction industry?
- What is their philosophy for working with sub-contractors and clients?
Once you have narrowed it down to the top 2 or 3 contractors on your list, ask to visit one of their current job sites or explore past work completed. This will allow you to see the quality of their work and also if it is a job site, how neat they keep it.
Prepare for an Allowance
No, we don’t mean the kind of allowance that came from completing your chores when you were young. Rather, a contractor will put allowances in the bid for you to choose materials and products for the project. An example may be an allowance for kitchen cabinetry or a master bathroom shower. Obviously, you can spend less than the actual allowance, the full amount of the allowance or go over the allowance. An allowance basically serves as a placeholder in the budget until the finishes are chosen.
Keep an Open Line of Communication
A lot of things can happen throughout the construction process. Therefore, it’s important to have a good line of communication with a contractor to be kept in the loop with everything going on. Make sure that you are kept up-to-date with frequent progress reports to ensure that the project is on time and on budget.
While it’s the last thing that you probably want to do, documenting the process can serve not only as a journal of sorts, but also to refer back to in case anything comes up. If something comes up that the contractor asks for more money or time, then you need to be able to document it.
It’s important to frequently visit the job site to ensure that the project is not only on track, but everything is being done according to the construction plan. By monitoring progress, you can ensure that doors, windows, etc. are in all of the right places according to how you wanted them installed. Additionally, it also allows you to check in on the quality of the craftsmanship and that everything is up to your standards.